Sanyo DSR-5716P - Manual (Page 214)

DVR VIEWER2 1
English
213
The image files are not displayed when the Viewer Software is
run. Specify and open the playback file through the procedure
below.
1
Click in the toolbar.
Or, click “Open” in the file menu.
The [Open] dialog is displayed.
2
Click .
The [Browse for Folder] dialog is displayed.
3
Specify the folder in which the images
are saved and click [OK].
The folder specified in the [Open] dialog is displayed.
4
Verify the displayed folder and click
[OK].
The image file loads.
5
Screen display
The first image of the loaded file is initially displayed on full
screen.
Refer to the appropriate pages for details about the operations
of the Viewer Screen.
z
Switching the display pattern (1/4/9/16 screen) of the
playback images (Refer to P214)
z Selecting the channels displayed on each screen (Refer to
P214)
z Operating panel functions (Refer to P215)
Opening Image Files
01 09/29/2005 16:28:24