Sanyo DSR-5716P - Manual (Page 188)

English
187
3
RECORD SET
The unit’s hard disk is separated into two independent
recording areas. Furthermore, five different recording modes
can be used for these two areas.
The memory capacity for each area is allocated as a
percentage. (Setting units: 1%)
1
Click the button on the operation
panel.
The “MAIN MENU” is displayed.
2
Click “2. RECORD SET”.
The “RECORD SET” screen is displayed.
3
Click “1. RECORDING AREA SET”.
The “RECORDING AREA SET” screen is displayed.
(1) Total capacity display
Displays the total capacity of the hard disk and the capacity of
all internal and expansion hard disks.
z You can install up to six hard disks by using an expansion
unit.
(2) Area-specific capacity display
Displays the capacity set by the unit for each recording area
as a percentage of the total capacity.
z Setting and modification of recording area capacities
cannot be made from a PC.
(3) Recording area reset
If the overwrite setting is “OFF”, recording automatically stops
when the corresponding recording area becomes full. In this
case, click [AREA FULL RESET] to overwrite from the
beginning of each area. (Jstep 4)
Reset is not required in the following cases and, therefore,
[AREA FULL RESET] is not displayed.
z
When the overwrite setting is “ON”.
1. RECORDING AREA SET
Recording
area
Recording
mode
Recording method
Recording
area
Normal
recording
Manual
Recording is performed by
manual operation of the
button on the operation panel.
Timer
recording
Automatic
Recording is performed
automatically for the time
period set with “2-5. TIMER
SET”.
Alarm
recording
Automatic
Recording is performed
automatically when an alarm
is detected, as set with “2-6.
ALARM REC MODE SET”.
Pre-alarm
recording
Automatic
Automatic recording of images
before an alarm occurs, as set
with “PRE-ALARM RECORDING”
in “2-6. ALARM REC MODE
SET”.
This function is used together
with alarm recording.
Archive
area
Copy Manual
The required images are
copied from another recording
area and stored by manual
operation of the
button on
the operation panel.
RECORD SET
1. RECORDING AREA SET
2. RECORDING CONDITIONS SET
3. NORMAL REC MODE SET
4. PROGRAM REC SET
5. TIMER SET
6. ALARM REC MODE SET
RECORDING AREA SET
TOTAL CAPACITY : 600 GB
INTERNAL HDD : 300 GB
EXTERNAL HDD : 300 GB
ARCHIVE AREA : 20%
RECORDING AREA : 80%
AREA FULL RESET
AREA FULL RESET
(2)
(3)
(1)