Sanyo DSR-5716P - Manual (Page 93)

92
English
RECORD SET 2
INTRODUCTION
SE
TTINGS
NE
T
W
O
R
K
CO
NT
RO
L
NETW
ORK
O
P
E
RATION
NE
T
W
ORK
S
E
TTINGS
OTHE
R
OPE
RATION
Use the following procedures to set recording start and stop
times using the timer function.
Timer setting items can be used to set times at which to start
and stop recording and the recording rate on each specified
day of the week.
(1) WEEK
This column is used to select the days of the week for timer
settings. Select “DLY” to perform timer recording for the same
duration at the same rate every day. The 7th (default: “SAT”)
and 8th (default: “DLY”) lines are used for timer recording
settings of over 24 hours.
(2) START
This column is used to enter the 24-hour time at which to start
timer recording.
(3) STOP
This column is used to enter the 24-hour time at which to stop
timer recording.
If the start and end times are on different days (i.e., midnight
is included), a “T” is displayed to the left of the end time.
(4) PROGRAM
This column is used to enable timer recording using the
program function “P-1” through “P-4”. (JP.90)
(5) FPS
This column is used to set the recording rate.
No setting is required here when using program recording.
(6) SET
This column is used to set timer recording to “ON” or “OFF”.
When set to “OFF”, timer recording is disabled.
(7) Settings for timer recording of over 24 hours
Use these lines for timer recording spanning more than 24
hours.
z The settings made using <NORMAL REC MODE SET>
are used to set picture quality and audio recording for timer
recording. (JP.88)
z Ensure that start and end times are input using 24-hour
notation.
z If the start and end times are on different days (i.e.,
midnight is included), a “T” is displayed to the left of the
end time.
1
Press the [MENU] button.
The MENU indicator lights up and the <MAIN MENU> is
displayed.
2
Turn the jog dial to select “2.RECORD
SET” and then turn the shuttle dial
clockwise.
The <RECORD SET> screen is displayed.
3
Turn the jog dial to select “6.TIMER
SET” and then turn the shuttle dial
clockwise.
The <TIMER SET> screen is displayed.
4
Turn the shuttle dial clockwise.
“SUN” flashes.
Timer settings
Timer setting items
<TIMER SET>
WEEK START STOP PROGRAM FPS SET
SUN --:-- --:-- OFF 12.5 FPS OFF
MON --:-- --:-- OFF 12.5 FPS OFF
TUE --:-- --:-- OFF 12.5 FPS OFF
WED --:-- --:-- OFF 12.5 FPS OFF
THU --:-- --:-- OFF 12.5 FPS OFF
FRI --:-- --:-- OFF 12.5 FPS OFF
SAT --:-- --:-- OFF 12.5 FPS OFF
DLY --:-- --:-- OFF 12.5 FPS OFF
EXT ***** ***** OFF 12.5 FPS OFF
(1) (2) (3) (4) (5) (6)
(7)
Making timer reservations every day or every
week for the same duration with the same
recording rate
MENU
<TIMER SET>
WEEK START STOP PROGRAM FPS SET
SUN --:-- --:-- OFF 12.5 FPS OFF
MON --:-- --:-- OFF 12.5 FPS OFF
TUE --:-- --:-- OFF 12.5 FPS OFF
WED --:-- --:-- OFF 12.5 FPS OFF
THU --:-- --:-- OFF 12.5 FPS OFF
FRI --:-- --:-- OFF 12.5 FPS OFF
SAT --:-- --:-- OFF 12.5 FPS OFF
DLY --:-- --:-- OFF 12.5 FPS OFF
EXT ***** ***** OFF 12.5 FPS OFF
<TIMER SET>
WEEK START STOP PROGRAM FPS SET
SUN --:-- --:-- OFF 12.5 FPS OFF
MON --:-- --:-- OFF 12.5 FPS OFF
TUE --:-- --:-- OFF 12.5 FPS OFF
WED --:-- --:-- OFF 12.5 FPS OFF
THU --:-- --:-- OFF 12.5 FPS OFF
FRI --:-- --:-- OFF 12.5 FPS OFF
SAT --:-- --:-- OFF 12.5 FPS OFF
DLY --:-- --:-- OFF 12.5 FPS OFF
EXT ***** ***** OFF 12.5 FPS OFF