Symmetricom XLi IEEE 1588 - Manual (Page 111)

XLi IEEE 1588 Clock 103
997-01510-03, Rev. C, 12/12/2006
2
5
1
S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S
Use function F111 to configure the J2 Output to generate rates (listed below). The following rates are
available as a standard feature: 1 PPS, 10 PPS, 100 PPS, 1 kPPS, 10 kPPS, 1 MPPS, 5 MPPS,
10 MPPS. The factory setting is 10 MPPS.
For J2 specifications, see “J2 Output – Rate Out” on page 12 .
Keypad
Selecting one of the Standard Rates: Using the keypad, press the ENTER, 111, ENTER buttons.
Select one of the standard rates using the up/down arrow buttons and press the ENTER button again.
When prompted “Save changes? Yes”, press the ENTER button one more time.
Command Line
Requesting the Current Configuration
To request the J2 Output Configuration, enter the following:
F111<CR>
The XLi responds in the following format:
F111<S><RATE><CR><LF>
Where:
Depending what F111 is currently set up to do, the sample request:
F111<CR>
Displays a fixed 10 PPS rate output (example):
F111 RATE 10PPS<CR><LF>
F = ASCII character F
111 = Function number
<S> = ASCII space character one or more
<RATE> = Output rate or type, RATE 1 PPS, RATE 10 PPS, RATE 100 PPS, RATE 1 kPPS, RATE
10 kPPS, RATE 100 kPPS, RATE 1 MPPS, RATE 5 MPPS, RATE 10 MPPS
<START> & <STOP> = Time-of-year with microsecond resolution in the format of yyy:hh:mm:ss.uuuuuu.
Range: [001:00:00:00.000000, 366:23:59:59.999999] Note: Wildcard character: 'X' or
'x' can also be entered. See the section regarding time string with wildcard character.
Colon separators (“:”) are required
<CR><LF> = Line terminator: a carriage return and line feed for output strings, or a carriage return
for input strings