Function reference, Function summary, List – Symmetricom XLi IEEE 1588 User Manual

Page 43: F1 – time zone offset, F3 – time & date, F4 – serial port configuration, F5 – time-quality setup, F6 – keypad lock, F8 - continuous time once-per- second, F9 - time on request

Advertising
background image

XLi IEEE 1588 Clock

35

997-01510-03, Rev. C, 12/12/2006

2

5

1

S

S

S

S

S

S

S

S

S

S

S

S

S

S

S

S

S

S

S

S

S

S

S

S

S

S

S

S

S

S

S

S

S

S

S

S

S

S

S

S

5: Function Reference

Function Summary

The following summary lists all the XLi functions, identifies the user interfaces from which each one is
available, and provides a brief description of the function.

Available from: K = keypad, N = Network Port (Telnet), S = Serial Port, W = Web

Function

Available
From

Description

F1 – Time Zone Offset

K,N,S,W Set the time offset for Standard and Local time

F2 – 12/24 Hour Format

K,N,S,W Apply a 12 or 24-hour format to the Front Panel Display, to

F8, F9, and F90.

F3 – Time & Date

K,N,S,W Set the time and date (when not already provided by a

reference source)

F4 – Serial Port Configuration

K,N,W

Configure the main serial port settings

F5 – Time-Quality Setup

K,N,S,W Set the thresholds for each of the four time quality flags

F6 – Keypad Lock

K*,N,S

Lock keypad access to the XLi’s functions. (When locked,
F6 is the only function available from the keypad.)

F8 - Continuous Time Once-per-
Second

N,S

Output the time once-per-second (to the command line)

F9 - Time On Request

N,S

Output the time when triggered (to the command line)

F11 - Time Output Format

N,S

Change the format of the time output by F8 and F9

F13 – Time Error

K,N,S,W View the current estimated worst case time error

F18 – Software Version Request

K,N,S,W View the XLi’s software version information

F27 – FTM III Configuration

K,N,S,W Not supported.

F42 – Multicode Output Configuration

K,N,S,W Not supported.

F44 – N.8 Frequency Synthesizer

K,N,S,W Not supported.

F50 – GPS Receiver LLA/XYZ Position

K,N,S,W View the Latitude/Longitude/Altitude or geocentric X/Y/Z

coordinates of one or more GPS antennas.

F51 – GPS Antenna Cable Delay

K,N,S,W Compensate for the delay caused by the length of the GPS

antenna cable. (Use F52 to adjust timing outputs.)

F52 – Distribution Cable Delay

K,N,S,W Compensate for the length of the distribution cable on J2.

F53 – GPS Operation Mode

K,N,S,W Operate specific GPS receivers in Time Mode for static

applications, or in Dynamic Mode for mobile applications.

F60 – GPS Receiver Satellite List

K,N,S,W View a list of current and tracked satellites.

Advertising