Symmetricom XLi IEEE 1588 - Manual (Page 181)

XLi IEEE 1588 Clock 173
997-01510-03, Rev. C, 12/12/2006
2
5
1
S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S
SYNTAX INTEGER {
locked(1),
unlocked(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Gives the current status of the clock, locked or unlocked."
::= { systemStatusGeneral 1 }
statusClockSourceOBJECT-TYPE
SYNTAX INTEGER {
clockIrigA (1),
clockIrigB (2),
clockIrigG (3),
clockNasa36 (4),
clockPrimary (5),
clockSecondary (6),
clockAuxRef (7),
clockNone (8)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Identifies the current clock source."
::= { systemStatusGeneral 2 }
statusDescriptorStrOBJECT-TYPE
SYNTAX DisplayString (SIZE (0..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Describes the XLi system at the time the alarm was triggered.
The format matches the output of the F73 command."
::= { systemStatusGeneral 3 }
statusPllSynthesizerOBJECT-TYPE
SYNTAX INTEGER {
unlocked(1),
locked (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Gives the current status of the PLL synthesizer."
::= { systemStatusDetail 1 }
statusLpnPllOBJECT-TYPE
SYNTAX INTEGER {
unlocked(1),
locked (2)
}
MAX-ACCESS read-only