Symmetricom XLi IEEE 1588 - Manual (Page 176)

168 XLi IEEE 1588 Clock
997-01510-03, Rev. C, 12/12/2006
S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S
1
::= { systemFaultConfigData 2 }
configDataTimeout OBJECT-TYPE
SYNTAX Unsigned32 (0..86400)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The timeout delay, in seconds, after which a time error fault
becomes a timeout fault."
::= { systemFaultConfigData 3 }
configDataPowerOnSuppress OBJECT-TYPE
SYNTAX Unsigned32 (0..86400)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The minor alarm power on timeout in seconds."
::= { systemFaultConfigData 4 }
maskPllSynthesizer OBJECT-TYPE
SYNTAX FaultMaskType
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"If enabled, an alarm can be triggered when the PLL
synthesizer status changes."
::= { systemFaultConfigMasks 1 }
maskLpnPll OBJECT-TYPE
SYNTAX FaultMaskType
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"If enabled, an alarm can be triggered when the LPN PLL status
changes."
::= { systemFaultConfigMasks 2 }
maskPrimaryRefClk OBJECT-TYPE
SYNTAX FaultMaskType
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"If enabled, an alarm can be triggered when the primary reference clock
lock status changes."
::= { systemFaultConfigMasks 3 }
maskSecondaryRefClk OBJECT-TYPE
SYNTAX FaultMaskType
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"If enabled, an alarm can be triggered when the secondary reference
clock lock status changes."
::= { systemFaultConfigMasks 4 }