Set the default gateway, Where: for example, enter, Response (one of the following lines) – Symmetricom XLi IEEE 1588 User Manual
Page 135: F131 b<n><sp>sm<sp>nnn.nnn.nnn.nnn, F131 b<n> g, F131 b<n><sp>g<sp>nnn.nnn.nnn.nnn
XLi IEEE 1588 Clock
127
997-01510-03, Rev. C, 12/12/2006
2
5
1
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
F131 B<N><SP>SM<SP>nnn.nnn.nnn.nnn
where:
For example, enter:
F131 B4 SM 255.255.255.0
Response (one of the following lines):
OK - The Subnet Mask has been received and applied by the PTP Option Card<CR><LF>
Set the Default Gateway
To get the Default Gateway, enter:
F131 B<N> G
To set the Default Gateway, enter:
F131 B<N><SP>G<SP>nnn.nnn.nnn.nnn
where:
For example, enter:
F131 B4 G 206.54.47.1
F
= ASCII character F
131
= unit function number
<SP>
= space
B
= ASCII letter to denote Option Bay number follows
<N>
= Option Bay Number, 1 through 4.
SM
= specify Subnet Mask command
nnn.nnn.nnn.nnn = dotted decimal address
F
= ASCII character F
131
= unit function number
<SP>
= space
B
= ASCII letter to denote Option Bay number follows
<N>
= Option Bay Number, 1 through 4.
G
= specify Default Gateway command
nnn.nnn.nnn.nnn = dotted decimal address