F100 p – change user password, F100 pi – ping, F100 pn – change user name – Symmetricom XLi IEEE 1588 User Manual
Page 45: F108 – oscillator configuration, F110 – j1 input (tiet), F111 – j2 output (rate), F113 – j3 input configuration (aux ref), F116 – display brightness level, F117 – factory configuration, F118 – option board configuration
XLi IEEE 1588 Clock
37
997-01510-03, Rev. C, 12/12/2006
2
5
1
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
N,S
Reboot the XLi
N,S,W
Change the XLi password
N,S
Ping from the XLi to another host on the network
N,S,W
Change the User Name
F108 – Oscillator Configuration
K,N,S,W View the oscillator type
K,N,S,W Configure the J1 input connector. IRIG Time Code not
supported.
K,N,S,W Configure the J2 output connector. PPO not supported.
F113 – J3 Input Configuration (Aux
Ref)
K,N,S,W Configure the J3 input connector. Freq Meas not
supported.
F116 – Display Brightness Level
K
Set the brightness of the display on the XLi’s front panel
K,N,S,W View some of the factory settings such as the serial
number
F118 – Option Board Configuration
K,N,S,W View the contents of each option bay. Only recognizes
certain cards
F119 – GPS Receiver Configuration
K,N,S,W Configure and display status for GPS Receivers
F120 - N.1 Frequency Synthesizer
K,N,S,W Not supported.
F123 – Have Quick Input/1 PPS Sync
Configuration
K,N,S,W Not supported.
K,N,S
Enable an XLi option by entering a software key
F128 - Have Quick Output
K,N,S,W Not supported.
a.The web interface makes it convenient to edit the SNMP configuration files directly in the browser. Symmetricom
recommends this approach versus the more complicated approach of transferring configuration files to an FTP server.
Please note that the functions marked “Not Supported” are associated with options that are unavailable for
the XLi IEEE 1588 clock. While those functions remain in the user interfaces, many references to them have
been removed from this manual to avoid confusion. For additional information on these functions, consult the
User Guide for the standard XLi Time and Frequency System, available from the XLi Product Information
CD-ROM and fr
.