Smart Inventions SMART Height-Adjustable Wall mount HAWM-UX/UF User Manual
Page 37
32 |
CHAPTER 3 – CABLING AN 880i4 OR 885i4 SYSTEM TO A HAWM-UX/UF
Using the SMART UF65 and SMART UF65w projector ECP
for other components
The following diagram and list identify the ECP connections to components that aren’t
mounted to the HAWM-UX/UF.
Connecting the power, network and other peripheral device
cables to your SMART UF65 or SMART UF65w projector
Peripheral devices that don’t mount on the HAWM-UX/UF but that connect to your
projector’s connection panel on the HAWM-UX/UF require a certain amount of slack in
the cable for the projector’s rise and descent. When connecting your projector’s power
cable, don’t bundle it with or place it parallel to other peripheral device cables you
attach to your projector. If the wires cross or travel the same path, make sure it is
placed perpendicular (at right angles) to other unpowered cables.
Number
Function
1
USB A jack (for USB drives)
2
Power button and status light
3
Volume control
4
Input selection
5
Two mini USB B jacks (connect to computers 1 and 2)
6
11-pin connector (connects to ECP harness cable)
7
4-pin connector (for room control)
2
3
4
5
7
6
1