Smart Inventions SMART Height-Adjustable Wall mount HAWM-UX/UF - Manual (Page 44)

38 | CHAPTER 4 – CABLING A 685ix OR D685ix SYSTEM TO A HAWM-UX/UF
Placing cables for HAWM-UX/UF-mounted
components
To prevent cable friction, SMART recommends that you first place the cables that
don’t shift after they’re installed. Cables that connect components mounted to the
HAWM-UX/UF don’t shift after they’re installed. The wire management bundle (WMB)
shifts only if it’s connected to the wall or to a guest computer.
Using the SMART UX60 projector connection panel for
HAWM-UX/UF-mounted components
To access the projector connection panel and wire management clip, remove the
input/output cover on the left side of the projector and remove the cable covers. For
more information, see the SMART Board 685ix and D685ix Interactive Whiteboard
System Configuration and User’s Guide (
smarttech.com/kb/137396 ).
The following diagram and list identify the projector’s connections to
HAWM-UX/UF-mounted components.
2
3
4
6
5
1
7