Smart Inventions SMART Height-Adjustable Wall mount HAWM-UX/UF - Manual (Page 61)

55 | CHAPTER 5 – CABLING A 600I4 OR D600I4 SYSTEM TO A HAWM-UX/UF
Using the SMART UF65 and SMART UF65w projector ECP
for HAWM-UX/UF-mounted components
The following diagram and list identify the ECP ports that connect to
HAWM-UX/UF-mounted components.
Connecting your SMART UF65 or SMART UF65w projector’s
ECP harness cable
The ECP harness cable controls all signals and commands sent between the ECP
and the projector. Choose a side of the interactive whiteboard to install your ECP on,
and then follow the instructions in the SMART Board 600i4 and D600i4 Interactive
Whiteboard System Configuration and User’s Guide (
smarttech.com/kb/146184 ).
Number Function
1 USB B jack (reserved for the primary computer)
2 DB15 ECP connector (reserved for ECP harness cable)
1
2