Smart Inventions SMART Height-Adjustable Wall mount HAWM-UX/UF - Manual (Page 77)

71 | CHAPTER 6 – CABLING A 600I3 OR D600I3 SYSTEM TO A HAWM-UX/UF
10. Flip up the bottom panel
of the ECP. Attach two
screws in the two bottom
plastic anchors using a
Phillips No. 2 screwdriver.
.
Using the SMART UF55 and SMART UF55w projector’s
connection panel for remotely mounted components
To access the projector connection panel and wire management clip, first remove the
input/output cover on the left side of the projector and remove the cable covers. For
more information, see the SMART Board 600i3 and D600i3 Interactive Whiteboard
System Configuration and User’s Guide (
smarttech.com/kb/131156 ).
The following diagram and list identify the SMART UF55 and SMART UF55w
projectors’ connections to components that don’t mount to the HAWM-UX/UF.