Smart Inventions SMART Height-Adjustable Wall mount HAWM-UX/UF - Manual (Page 64)

58 | CHAPTER 5 – CABLING A 600I4 OR D600I4 SYSTEM TO A HAWM-UX/UF
7. Place the Molex cable through the left
speaker cable clip, through the space
between the HAWM-UX/UF and the
interactive whiteboard.
8. Place the cable through the right speaker
cable clip.
9. Connect the Molex cable to both speakers,
and bundle any excess cable in the left
speaker cable clip.
Placing cables for other components
Cables for peripheral devices connected to the projector but not mounted on the
HAWM-UX/UF are at the greatest risk of damage, because they shift as the
HAWM-UX/UF rises and descends. These peripheral devices and cables include the
following:
• your computer or SMART Hub VE220 or SE240 collaboration platform
NOTE
Both the VE220 and SE240 models include 72" (183 cm) output cables for
connecting to your projector. You might need cable extensions (not included).
• a room control device
• a network cable
• the projector’s power cable
• other projector-to-input device connections (such as a DVD/Blue-ray player) using
S-video connections
When connecting these peripheral devices, make sure there’s enough slack, mount
the peripheral device to a permanent location and make sure there are no
obstructions in the cable path. Cable friction, rubbing and strain can occur if you don’t
take the proper precautions.
Left speaker
cable clip