Sun Microsystems StorageTek Modular Library System SL500 - Manual (Page 122)

Cartridge Management Tasks
90 SL500 User’s Guide • July 2008 Revision: KA • 96116
The screen is updated with the appropriate Source Location fields.
4. In the VOLID field, specify the VOLID of the cartridge you want to move.
5. In the Destination Location Type pull-down menu, select the type of location where
you want to move the cartridge to. Options are:
■
CAP
■
Storage Slots
■
Drive
■
Reserved Slots
The following restrictions apply:
■
The destination can be a drive only if the source is a CAP or reserved slot.
■
For you to move a a cartridge to a drive, the cartridge media type must be
compatible with the drive type.
■
You cannot move a cartridge to a location that is already occupied.
■
Although not strictly enforced, it is recommended that only diagnostic or cleaning
cartridges be moved to reserved slots.
6. In the Destination Location table, specify the library internal address of the
destination location by making the appropriate selections in the following pull-
down menus:
■
Library
■
Module