Sun Microsystems StorageTek Modular Library System SL500 - Manual (Page 136)

Drive Management Tasks
104 SL500 User’s Guide • July 2008 Revision: KA • 96116
Drive Adr
Location of the drive involved in the error. Format is l.m.r.c, where:
■
l = library ID
■
m = module ID
■
r = row ID
■
c = column ID
Volid
VOLID of the cartridge involved in the error.
Drive Serial Num
Serial number of the drive involved in the error.
Drive Type
Type of drive. For example, Hewlett-Packard LTO Ultrium 2 or Quantum SDLT 320.
Exception
Type of error. Options are:
■
LoadError—The drive load failed after all retries were attempted. See LoadRetry
for an explanation of the retry conditions.
■
LoadRetry—The drive load was successful, but required one or more retries,
which involve removing and reinserting the cartridge and reissuing a load
command to the drive. A retry is initiated if either the cartridge is not detected as
sensed from the drive (except DLT drives), or the load command to the drive fails.
■
MediaError—The drive signaled a media error during drive load or unload. IBM
drives allow cartridges with media errors to be loaded, while Hewlett-Packard
drives do not.
■
UnloadError—The library could not successfully unload and remove the cartridge
from the drive.