Library totals, Legend – Sun Microsystems StorageTek Modular Library System SL500 User Manual
Page 246
Partition Design and Commit Screens
214 SL500 User’s Guide • July 2008
Revision: KA • 96116
Library Totals
Note –
The data in these fields is automatically updated from the SL Console partition
workspace when you select a partition.
Allocated Storage Cells
Display only.
Total number of storage cells allocated to the selected partition, based on the
currently defined partition boundaries.
Allocated Drive Bays
Display only.
Total number of tape drives allocated to the selected partition, based on the
currently defined partition boundaries.
Allocated CAP Cells
Display only.
Total number of CAP cells allocated to the selected partition, based on the currently
defined partition boundaries.
Library Totals
Note –
The data in these fields is automatically updated from the SL Console partition
workspace when you select a partition.
Unallocated Storage
Display only.
Total number of storage cells in the library that are not allocated to any partition.
Unallocated Drive Bays
Display only.
Total number of tape drives in the library that are not allocated to any partition.
Unallocated CAPs
Display only.
Total number of CAP cells in the library that are not allocated to any partition.
Legend
Legend for the library map. The state of each library resource (storage cell, tape
drive, or CAP cell) is indicated as follows:
■
Not Accessible (white and x-ed out). Resource is not accessible to any partition.
Following are some possible reasons:
- Storage cells have been configured for diagnostic cartridges.
■
Available (white). Resource is currently not allocated to any partition and
therefore available to the selected partition.
■
Partition n (gold). Resource is allocated to the selected partition, partition n.