Sun Microsystems StorageTek Modular Library System SL500 - Manual (Page 92)

Library and Device Status
60 SL500 User’s Guide • July 2008 Revision: KA • 96116
Communications Failures
If the SL Console loses communication with the library controller, after about 30–60
seconds, the heartbeat monitor turns gray, then red, and the following error message
appears:
Heartbeat message not received from the library controller.
You must log off from the SL Console and then log on again to restore communication.
Viewing Library Information
The System Details > Library menu provides options for viewing and modifying
library information, such as library configuration and status and drive auto cleaning
configuration. For complete details, see the following topics:
■
“Library Management Tasks” on page 66
■
“Drive Cleaning Tasks” on page 105
An error. This icon appears when the server response takes
longer than 30 seconds.
2 Userid Userid currently logged in to the SL Console.
3 Library Library to which the SL Console is connected, and a graphical
representation of the current health of the library and its devices. Possible
icons are:
All library devices are functioning normally.
A warning. One or more devices in the library is offline or
operating in a degraded state.
An error. One or more devices in the library has experienced a
failure.
4 Device
health
icon
Current status of the indicator device. When the library indicator shows a
warning or error, use this indicator to determine which devices are
experiencing abnormal conditions.
Indicator Description