Sun Microsystems StorageTek Modular Library System SL500 - Manual (Page 45)

Controls and Indicators
96116 • Revision: KA Chapter 1 SL500 Introduction 13
Service Required
See
TABLE 1-6 for details.
Indicator
■
LED is normally not lit.
■
LED is lit when the library experiences a failure or is in a
non-ready state.
Open Door Indicator
■
LED flashes amber when the Open Door button is pressed.
■
LED is solid amber when the robot is parked in the robotics
unit.
■
LED flashes during initialization and audit.
■
LED is not lit when the library is ready for customer use.
Button
When pressed:
1. Software allows the current job to complete. This could take a
while.
2. Software retracts the robot into the robotics unit so that it will
not be damaged when you open the door with the key.
Open CAP Indicator
■
LED is amber when any CAP doors are open.
■
LED is not lit when all CAP doors are shut.
Button
Button is used to open all CAP doors in a rack.
TABLE 1-6 Keypad Service Required LED
Activity Meaning Action
Flashing The redundant component failed. The service representative might need to
replace the failed redundant component,
such as power supply, tape drive, or
fan.
Diagnostics are running. Nothing, this is normal.
Diagnostics failed. The service representative might need to
check the log_error file for the result
code and perform the appropriate
action.
Door is open. Close and lock the door.
On solid The non-redundant component failed.
This includes the last working
component of a redundant set of
components, such as tape drives.
The service representative might need to
check the log_error and
log_warning
files to determine which
component failed, and replace the failed
component.
The library has stopped operating. The service representative might need to
check the log_error file for the result
code and perform the appropriate
action.
TABLE 1-5 Keypad Buttons and Indicators (Continued)
Buttons/Indicator Description