Sl500 wall diagrams and specifications, Moved to, Appendix a – Sun Microsystems StorageTek Modular Library System SL500 User Manual
Page 363: Appendix a, “sl500 wall diagrams and, Specifications, Table a-1
Advertising
96116 • Revision: KA
331
APPENDIX
A
SL500 Wall Diagrams and
Specifications
This appendix provides the following diagrams and tables:
■
“LTO Configurations” on page 332
■
“Mixed-Media Configurations” on page 337
■
Use the legend in
for all diagrams in this appendix.
Note –
Your tape management software might conflict with the following information.
Refer to your software publication for unique information.
TABLE A-1 Cell Figure Legend
Storage cells available for customer data cartridge
Cells reserved for cleaning and diagnostic cartridges (can be
configured for data cartridges)
Cells only available when an expansion module is installed. If this is
the lowest module in the rack, these cells are not available.
Array targets
Tape drives
Advertising