Sun Microsystems StorageTek Modular Library System SL500 - Manual (Page 318)

HandBot Utility Tasks
286 SL500 User’s Guide • July 2008 Revision: KA • 96116
▼
Define a Diagnostic Move
Multiple diagnostic move routines can be set up and run simultaneously, as long as the
target and pool address ranges do not overlap.
Note – This procedure requires sharing of HandBot resources; therefore, it is not
recommended that you run it during peak activity periods.
1. Select Tools > Diagnostics.
2. Click the Library folder on the device tree.
The Library screen appears.
3. Click the DiagMove tab and then the Manage tab.
The Diagnostic Move Manage screen appears.