Sun Microsystems StorageTek Modular Library System SL500 - Manual (Page 320)

HandBot Utility Tasks
288 SL500 User’s Guide • July 2008 Revision: KA • 96116
7. Complete the SOURCE screen as follows. See “Pool Address Range” on page 255 for
details.
■
In the Selection Mode field, click the appropriate cartridge pool address type.
■
In the Minimum Address and Maximum Address fields, select the library internal
addresses of the starting and ending locations of the cartridge pool you want to use.
8. Click Next.
The Sequence screen appears.
9. Complete the Sequence screen as follows. See “Move Access Order” on page 255 for
details.
■
Name of the diagnostic move
■
Move Count (specify a number between 1 and 5000)
■
Access order (Sequential or Random)
■
Move Type (Robot and Cartridge or Robot Only)
■
Disable pre move cartridge compatibility check