Sun Microsystems StorageTek Modular Library System SL500 - Manual (Page 233)

Partition Summary Screens
96116 • Revision: KA Chapter 6 Library Partitioning 201
Partitions—Summary (Step 2)—Add Connection
Sample Screen
Description
Allows you to configure the connection between a host and the selected partition. Each
partition can have up to nine host-partition connections, each one having a unique
LUN.
This screen is a popup that appears when you click Add Connection on the
Partitions—Summary (Step 2) screen.
Caution – Information in the SL Console partition workspace is saved to the library
controller database only through the Commit (Step 4) screen. If your SL Console
session ends or you refresh the workspace data before you have committed your
updates through the Commit (Step 4) screen, you will lose any partition changes you
have made through the Summary (Step 2) and Design (Step 3) screens and all
associated popups.
Screen Fields
Connections n
Display only.
Partition ID of the selected partition.
Initiator (WWPN)
Required.
World Wide Port Name of the host bus adapter (HBA).
Sixteen hexadecimal digits. You can enter upper- or lower-case hex digits, but the
display is always shown in all upper-case.
Target Port
Display only.
Port number of the SL500 library controller. This entry is always “0”.