Sun Microsystems StorageTek Modular Library System SL500 - Manual (Page 378)

Specifications
346 SL500 User’s Guide • July 2008 Revision: KA • 96116
Power Specifications
The following tables list power specifications for the modules and tape drives.
TABLE A-4 Power for Library Without Tape Drives
Input voltage 100–240 VAC, single phase
Frequency 50/60 Hz
Maximum library power consumption
1.4 A @ 120 V
0.8 A @ 240 V
Maximum heat output 614 Btu/hr
Voltage-amperes 180 VA
TABLE A-5 Power for Base Unit and Two LTO Tape Drives
Two LTO Tape Drives
Input power 219 Watts
Input voltage-amperes 226 voltage-amperes
Input current (100 VAC) 2.3 amperes
Input current (120 VAC) 1.9 amperes
Input current (240 VAC) 0.9 amperes
Btu/hour 748 Btu/hr
TABLE A-6 Power for Drive Expansion Module and Four LTO Tape Drives
Four LTO Tape Drives
Input power 288 Watts
Input voltage-amperes 297 voltage-amperes
Input current (100 VAC) 3.0 amperes
Input current (120 VAC) 2.5 amperes
Input current (240 VAC) 1.2 amperes
Btu/hour 983 Btu/hr