Perform a drive self-test, Perform a drive self-test 282 – Sun Microsystems StorageTek Modular Library System SL500 User Manual
Page 314
Advertising
Drive Utility Tasks
282 SL500 User’s Guide • July 2008
Revision: KA • 96116
▼
Perform a Drive Self-Test
1. Select Tools > Diagnostics.
2. Expand the Drive Folder, and click the drive you want to test.
3. Click the SelfTest tab.
4. In the Mode pull-down, click Non-Disruptive.
5. Click the Run button from the Options Bar.
Status messages are displayed as the self-test is run. A Diagnostic completed message
appears when the test finishes.
Advertising