Sun Microsystems StorageTek Modular Library System SL500 - Manual (Page 230)

Partition Summary Screens
198 SL500 User’s Guide • July 2008 Revision: KA • 96116
Screen Fields
Partition Summary
Partition Number
Display only.
ID assigned to the partition. IDs can range from 1–8.
Allocated Storage Cells
Display only.
Total number of storage cells allocated to this partition.
Allocated Drive Bays
Display only.
Total number of tape drives allocated to this partition.
Allocated CAP Cells
Display only.
Total number of individual CAP cells allocated to this partition.
Host-Partition Connection Summary
Note – The following fields display host-partition connection information for the
partition currently selected in the Partition Summary table.
Name
Display only.
Name assigned to the selected partition.
Library controller bar code presentation
Display only.
Tape cartridge bar code format assigned to the selected partition.
Initiator (WWPN)
Display only.
World Wide Port Name of the host bus adapter (HBA).
Target Port
Display only.
Port number of the SL500 library controller. This entry is always “0”.
LUN
Display only.
Logical unit number of the library partition on the host. This entry must be unique
on the host.