SmartBridges sB3021 - Manual (Page 23)

Page 23 of 113
i n t e l l i g e n t w i r e l e s s p l a t f o r m
airHaul 2 Nexus PRO™ User Guide
To configure the device in Repeater Mode, follow the steps below:
1. Go to Tools | System Configuration dropdown Menu. The System Configuration will be
displayed as shown below.
2. Click on the Device Mode link in the System Configuration page.
3. Choose Repeater Mode option and click on Apply Changes. Two dropdown menus for
configuring the two radios will appear.
4. Radio A can be configured as Root and Radio B as Remote and vice versa.
5. Click on Apply Changes. A confirmation IP configuration pop up window will appear as
shown below.
6. Click on the Apply Changes to save the IP configuration.
7. Please wait for the device to regain the settings in the Repeater Mode before proceeding to
configure the appropriate radio in the Root and Remote Mode.
Note: Please refer to the Radio Configuration Section for configuring one radio as Root and
the other as Remote.
Figure 2-8 Repeater Mode Selected