SmartBridges sB3021 - Manual (Page 99)

Page 99 of 113
i n t e l l i g e n t w i r e l e s s p l a t f o r m
airHaul 2 Nexus PRO™ User Guide
8.3 Link Test
The Link Test utility is available from the navigation menu bar Tools | Link Test drop down menu.
From Link Test tools, the user can test Throughput and perform Ping Test. The user needs to run
Radio Transmit on one radio and Radio Receive on the other to run the Throughput test. The user
needs to specify the IP address for the test.
Follow the steps below to do a Ping Test:
1. Enter a valid IP address for Far-end Radio IP Address.
2. Click on the ‘Start’ button under ‘Ping’. The Ping result will be displayed.
3. Click the ‘Stop’ button to stop the test.
Figure 8-7 Ping Test Result