SmartBridges sB3021 - Manual (Page 83)

Page 83 of 113
i n t e l l i g e n t w i r e l e s s p l a t f o r m
airHaul 2 Nexus PRO™ User Guide
Deleting Filters:
1. The filters added can be deleted by first selecting the added filters from the list and then
clicking on Delete Selected filters.
Figure 4-13: Delete Selected Filters.
In order to configure the desired Minimum and Maximum bandwidth, priority across classes or disable
certain classes:
1. Go to the QOS main page, click on the “QoS”, the page appears as shown in the figure below.
2. Key in the desired bandwidth inside the dialog box of Minimum and Maximum Bandwidth
3. Use the scroll bar to select the desired priority for a particular class.
4. In order to enable a particular class, click on the radio button. A tick mark indicates that the
particular class is enabled. In order to disable, click on the radio button and the tick mark
disappears indicating that the class is disabled.
5. Finally after configuring, click on the “Apply changes” to save the configuration.
Note: 0 indicates default priority (Best effort).