SmartBridges sB3021 - Manual (Page 4)

Page 4 of 113
i n t e l l i g e n t w i r e l e s s p l a t f o r m
airHaul 2 Nexus PRO™ User Guide
About This Document
This User Guide is for the networking professional who configures and manages the smartBridges’
Intelligent Nexus wireless backhaul, the airHaul
2
Nexus PRO™.
It provides detailed information on using the web-based configuration GUI to configure the airHaul
2
Nexus PRO unit. This manual will help you gain a better understanding of how the various
components of Nexus work.
To configure smartBridges’ products, you need to have a fundamental understanding of the concepts
and technology of Local Area Networks (LAN) and wireless networking. The system installer will
require expertise in the following areas:
• Outdoor radio equipment installation
• Network configuration
• Use of web browser for system configuration, monitoring and fault finding
In this chapter, you will find an overview of the User Guide and where to obtain additional information
regarding installation and set-up.
Overview of User Guide
The airHaul
2
Nexus PRO (sB3021) User Guide provides information on how to set-up and deploy the
unit. A web-based management tool is provided to assist the user to configure the airHaul
2
Nexus
PRO unit for different purposes.
In chapter 1, the configuration features of the web-based management tool and the system
requirements are listed.
Chapter 2 explains how to login as an administrator and to change the default password. The features
of the configuration page as well as the Navigation Menu Bar are explained. You will also learn how to
configure the unit to Repeater mode and to convert from one mode to the other. Also in this chapter,
instructions on modifying the configurations of the device such as Ethernet, Wireless, Bandwidth,
Radio parameters, Throughput Optimizer and Spanning Tree Protocol (STP) are given. Similar
instructions are provided for the Repeater or Link Aggregate (individual radio can be in Remote
Bridge, Remote Router/NAT). Finally, details on managing the wireless settings are provided.
Functions common to the different modes such as Link Performance parameters and Bandwidth
Controller are explained in chapter 3.
Chapter 4 explains the steps for configuring the Quality of Service (QoS) for the aH
2
NP.
The Site Survey Tool is explained in Chapter 5 and Chapter 6 shows how to perform antenna
alignment to optimize the radio performance.
Chapter 7 illustrates how to display Wireless and Ethernet Traffic Statistics through the ‘Networking’ |
‘Statistics’ drop down menu
The System Configuration such as modifying the SNMP security settings and resetting the unit are
given in Chapter 8. You will also learn how to save the configuration parameters as profiles and using
the Link Budget Planning Tool.
Finally, chapter 9 shows how to upgrade the airHaul
2
Nexus PRO through the web management
interface to the latest firmware.