SmartBridges sB3021 - Manual (Page 55)

Page 55 of 113
i n t e l l i g e n t w i r e l e s s p l a t f o r m
airHaul 2 Nexus PRO™ User Guide
2.9 Remote Router/NAT Configuration
The airHaul
2
Nexus PRO units can also be configured to operate as a Remote device to associate
with Root Bridge. In Remote Mode the unit can operate as Bridge or Router.
2.9.1 Bridge IP Configuration
The Ethernet IP is configured when the operational mode of one of the radios is configured as
Remote Router/NAT.
Follow these steps below if you need to re-configure the Remote Router/NAT Ethernet parameters:
1. From the ’Summary Information’ page, click on the ’Bridge IP Configuration’ link to change
Ethernet parameters.
2. Enter the ‘IP address’ and ‘IP mask’.
3. Click on the ‘Apply Changes’ button to change the settings.
Figure 2-40 Remote Router/NAT Ethernet Configurations