SmartBridges sB3021 - Manual (Page 29)

Page 29 of 113
i n t e l l i g e n t w i r e l e s s p l a t f o r m
airHaul 2 Nexus PRO™ User Guide
2.5.3 Link Aggregate Remote Router/NAT Mode
Follow the steps below for configuring the device in Link Aggregate Remote NAT Mode:
1. Go to Tools | System Configuration drop down Menu. The System Configuration will be
displayed as shown below.
2. Click on the Device Mode link in the System Configuration page.
3. Choose Link Aggregate Remote Router/NAT option and click on Apply Changes. A
confirmation Wireless IP pop up window will appear as shown below.
4. After setting the wireless IP, click on the ‘Apply Changes’. Refer to the figure below for the
confirmation pop up window.
Note: Please look into the Example in the 2.5.2 section, while configuring the Wireless IP for
the Remote Router/NAT
5. Please wait for the device to configure the settings in the Link Aggregate Remote Router/NAT
Mode. Radio A and Radio B will now be in Remote Router/NAT Mode.
6. Both Radio A and Radio B need to be associated with the respective Radio A and Radio B of
the Root device which is configured in Link Aggregate Root Router Mode.
Note: Ensure that both the radios are enabled for Link Aggregate Mode.
Note: Please look at the Radio Configuration Section for the Remote NAT Mode Configuration.