SmartBridges sB3021 - Manual (Page 75)

Page 75 of 113
i n t e l l i g e n t w i r e l e s s p l a t f o r m
airHaul 2 Nexus PRO™ User Guide
3.2 Bandwidth Controller
Using the bandwidth controller on the root device, the user can limit the wireless link bandwidth in the
egress direction. To effectively control the upload and download bandwidth, the user will need to
specify the necessary bandwidth parameters on both the airHaul
2
Nexus PRO devices.
The user can key in the maximum bandwidth of the wireless link allowed
if the feeding bandwidth is
adequate.
Follow the steps below to change the bandwidth parameters:
1. From the menu bar click on Networking | Bandwidth Controller dropdown menu item.
2. Click on the Enable radio button.
3. Enter Maximum Wireless Throughput for the egress traffic.
4. Click on the Apply Changes button to change the settings.
Figure 3-2 Bandwidth Controller