SmartBridges sB3021 User Manual
Page 53
Page 53 of 113
i n t e l l i g e n t w i r e l e s s p l a t f o r m
airHaul
2
Nexus PRO™ User Guide
2.8.2 Wireless
Configuration
The wireless parameters need to be configured to allow the Remote Bridge airHaul
2
Nexus PRO unit
to associate with the Root Bridge unit.
Follow these steps below to configure the Remote Bridge Mode wireless association parameters:
1 Go to the menu bar and from the Radio dropdown menu, select the particular radio that has
to be configured with the wireless settings in the Remote Bridge Mode.
2
Enter the SSID of the Root Bridge airHaul
2
Nexus PRO unit.
3
Enter the radio MAC address of the Root Bridge airHaul
2
Nexus PRO unit.
4
Choose a radio domain from the drop down list.
5
Choose a radio channel to associate the client with the root device.
6
Select the Transmit power of the radio from Dial-a-Power dropdown menu
7
Select the gain of the antenna from the dropdown menu as per the gain of the antenna being
used with the equipment.
8
Enter the RF cable loss based on the cable specifications
9 Click
the
Apply Changes. The units will attempt to associate.
Note: Clicking on ‘Status’ will display further details on the association
Figure 2-37 Remote Bridge Wireless Settings