Sun Microsystems Sun Fire X4200 - Manual (Page 102)

8-4 Sun Fire X4100 and Sun Fire X4200 Servers System Management Guide • December 2005
■ Log Out button – Click to end the current session of the ILOM web GUI. You are
directed to the Sun Integrated Lights Out Manager Logout screen.
■ About button – Click to view copyright information.
■ User field – Displays the user name of the current user of the ILOM web GUI.
■ Server field – Displays the name of the service processor.
The navigation bar provides tabs that you can click to open a specific ILOM web
GUI page. When you click a main tab, subcategories of tabs are displayed, providing
you with further options to choose. Select the tabs to open the appropriate ILOM
web GUI pages.
The content area of the ILOM web GUI page is where you find information about
the specific topic or operation you chose using the tabs. The content area displays,
for instance, logs, status indicators, task wizards, and command buttons to execute
an operation.
8.2 How to Log In and Out of the Sun ILOM
Web GUI
This section explains how to log in to and out of the Sun™ Integrated Lights Out
Manager (ILOM) web graphical user interface (GUI).
The ILOM Service Processor (SP) is booted automatically when the Sun Fire X4100 or
Sun Fire X4200 server is cabled appropriately and plugged in to an AC supply,
usually within one minute. However, if the management Ethernet is not connected,
or if the SP's Dynamic Host Configuration Protocol (DHCP) process fails due to the
absence of a DHCP server on the management network, the SP might take a few
minutes to boot.
8.2.1 Before You Begin
The ILOM web GUI has been tested successfully with Mozilla 1.7.5, Firefox 1.0, and
Internet Explorer 6.0 web browsers, and may be compatible with other web
browsers. Disabling the use of the browser proxy server (if one is used) for access to
the management network might make the ILOM web GUI response time faster.
Do not use the Refresh or Log Out buttons in your Internet web browser when using
the ILOM web GUI. Instead, only use the Refresh and Log Out buttons provided at
the top right of the ILOM web GUI window.