Sun Microsystems Sun Fire X4200 - Manual (Page 149)

Chapter 11 System Configuration Using the SP GUI 11-5
11.3.2 What to Do
1. From the Configuration tab, choose Clock Settings.
The Clock Settings page appears.
FIGURE 11-3 Clock Settings Page
2. To set the SP clock manually:
a. Type a date in the Date text box.
Type the date in the format mm/dd/yyyy.
b. Set the hour and minute using the drop-down list boxes.
3. To synchronize the SP clock with an NTP server:
a. Click the Enable check box next to Synchronize Time Using NTP.
b. Type the IP addresses of the NTP servers you want to use.
4. Click Save for your changes to take effect.