13 displaying version information, 1 displaying cli commands, 2 displaying active sessions – Sun Microsystems Sun Fire X4200 User Manual
Page 96: 3 displaying available targets, 14 how to update the service processor firmware, Displaying version information, Displaying cli commands, Displaying active sessions, Displaying available targets, How to update the service processor firmware
7-20
Sun Fire X4100 and Sun Fire X4200 Servers System Management Guide • December 2005
7.13
Displaying Version Information
Type this command to display the current service processor version:
version
7.13.1
Displaying CLI Commands
Type this command to display all of the service processor CLI commands:
show /SP/cli/commands
7.13.2
Displaying Active Sessions
Type this command to display the active service processor sessions:
show /SP/sessions
7.13.3
Displaying Available Targets
Type this command to display the available vaild targets:
help targets
7.14
How to Update the Service Processor
Firmware
You can update the service processor firmware from the command-line interface.
Updating the service processor from the command line enables you to update both
the SP firmware and the BIOS at the same time. See the load command page for
more information.