Sun Microsystems Sun Fire X4200 - Manual (Page 163)

Chapter 13 Managing Users Using the SP GUI 13-3
2. Click a radio button next to a user account, identified as Not Configured.
If all 10 user account slots are configured, you must delete an existing user account
before you can add a new user account. See
Section 13.4, “How to Remove an SP
User Account” on page 13-9 .
3. Click the Add button.
The Add User dialog box appears.
FIGURE 13-2 Add User Dialog Box
4. Complete the following information:
a. Type a user name in the User Name field.
The user name must be at least 4 characters and no more than 16 characters. User
names are case sensitive and must start with an alphabetical character. You can
use alphabetical characters, numerals, hyphens, and underscores. Do not include
spaces in user names.
b. Type a password in the Password field.
The password must be at least 8 characters and no more than 16 characters. The
password is case sensitive. Use alphabetical, numeric, and special characters for
better security. You can use any character except a colon. Do not include spaces in
passwords.