Sun Microsystems Sun Fire X4200 - Manual (Page 74)

6-4 Sun Fire X4100 and Sun Fire X4200 Servers System Management Guide • December 2005
TABLE 6-6 System Management Access Commands
Description Command
Display information
about HTTP settings. show /SP/services/http
Change HTTP
settings, such as
enabling automatic
redirection to HTTPS. set /SP/services/http port= portnumber secureredirect enabled|disabled
servicestate= enabled|disabled
Display information
about HTTPS access. show /SP/services/https
Change HTTPS
settings. set /SP/services/https port= portnumber servicestate=enabled|disabled
Display SSH DSA key
settings. show /SP/services/ssh/keys/dsa
Display SSH RSA key
settings. show /SP/services/ssh/keys/rsa
TABLE 6-7 SNMP Commands
Description Command
Display information about
SNMP settings. By default,
the SNMP port is 161 and v3
is enabled. show /SP/services/snmp engineid= snmpengineid
port= snmpportnumber sets=enabled|disabled v1=enabled|disabled
v2c= enabled|disabled v3=enabled|disabled
Display SNMP users. show /SP/services/snmp/users
Add an SNMP user. create /SP/services/snmp/users/ snmpusername
authenticationpassword= password
authenticationprotocol= MD5|SHA permissions=rw|ro
privacypassword= password privacyprotocol=none|DES
Delete and SNMP user. delete /SP/services/snmp/users/ snmpusername
Display information about
SNMP public (read-only)
communities. show /SP/services/snmp/communities/public
Add this device to an SNMP
public community. create /SP/services/snmp/communities/public/ comm1
Delete this device from an
SNMP public community. delete /SP/services/snmp/communities/public/ comm1