Sun Microsystems Sun Fire X4200 - Manual (Page 164)

13-4 Sun Fire X4100 and Sun Fire X4200 Servers System Management Guide • December 2005
c. Retype the password in the Confirm Password field to ensure that the password
is correct.
d. Assign network and serial privileges. Select either Administrator or Operator
in each field.
e. When you are done entering the new user’s information, click Add.
The User Accounts page is redisplayed. The new user account and associated
information is listed on the User Accounts page.
13.2 How to Modify an SP User Account
This section explains how to modify a user account for the ILOM Service Processor.
A user account is a record of essential user information that is stored on the service
processor.
13.2.1 User Roles and Privileges
Each user account consists of a user name, a role, and privileges. A user can have
one of these roles:
■ Administrator - Enables access to all service processor features, functions, and
commands.
■ Operator - Enables limited access to service processor features, functions, and
commands.
The Administrator assigns the user name and user role to a user account. The
Administrator also assigns the network and serial privileges to the user account.
■ Network privileges - Enable remote access privileges, either Administrator or
Operator.
■ Serial privileges - Enable local privileges, either Administrator or Operator.
An Operator is unable to change his assigned role or privileges.
13.2.2 Before You Begin
Log in to the service processor (SP) as Administrator to reach the ILOM web GUI.