Troubleshooting & repair, Typical dc weld output - machine loaded – Lincoln Electric IDEALARC CV-300 User Manual
Page 62
Advertising
F-23
TROUBLESHOOTING & REPAIR
F-23
IDEALARC CV-300
5ms
20V
0 Volts
CH1
This is a typical CV output voltage generat-
ed from a properly operating machine. Note
that each vertical division represents 20
volts and that each horizontal division rep-
resents 5 milliseconds in time.
The machine was loaded with a resistance
grid bank.
Note: Scope probes connected at machine
high inductance output terminals.
Volts/Div . . . . . . . . . . . . . . . . .20 V/Div.
Horizontal Sweep . . . . . . . . . .5 ms/Div.
Coupling . . . . . . . . . . . . . . . . . . . . .DC.
Trigger . . . . . . . . . . . . . . . . . . .Internal.
SCOPE SETTINGS
MACHINE LOADED TO 300 AMPS AT 32 VDC
TYPICAL DC WELD OUTPUT - MACHINE LOADED
Advertising