And diode mounting instruction, Troubleshooting & repair, Warning – Lincoln Electric IDEALARC CV-300 User Manual
Page 74
F-35
TROUBLESHOOTING & REPAIR
F-35
IDEALARC CV-300
MOUNTING OF STUD TYPE DIODES TO ALUMINUM HEAT SINKS
MATERIALS NEEDED:
1/2" Open end wrench.
Lincoln E1868 (Dow Corning 340) Heat Sink Compound.
"Slip" type torque wrench.
Service and repair should be performed only by Lincoln Electric factory trained per-
sonnel. Unauthorized repairs performed on this equipment could result in danger to
the technician or the machine operator and will invalidate your factory warranty. For
your safety and to avoid electrical shock, please observe all safety notes and pre-
cautions detailed throughout this manual.
If for any reason you do not understand the test procedures or are unable to perform
the tests/repairs safely, contact the Lincoln Electric service department for technical
troubleshooting assistance before you proceed.
Call (216) 383-2531 or (800) 833-9353 (WELD).
_____________________________________________________________
WARNING