Troubleshooting & repair, Control pc board removal and replacement – Lincoln Electric IDEALARC CV-300 User Manual
Page 68
Advertising
CONTROL PC BOARD REMOVAL AND REPLACEMENT
F-29
TROUBLESHOOTING & REPAIR
F-29
IDEALARC CV-300
PROCEDURE
1.
Disconnect main AC input power to
the machine.
2.
Remove the Case Roof.
3.
Disconnect the Molex plugs from the
control board.
4.
Remove the four screws located on
the outboard side of the Case Front
panel that mount the control board
to the front panel.
5.
Remove the control board from the
mounting studs carefully.
6.
Replace all insulating material,
mounting screws, and Molex plugs
when installing the control board.
Advertising