Lexmark 4I3 - Manual (Page 144)

e. Press Scroll or Scroll until the printer displays the
desired address.
f. Press Enter to set the address. An asterisk ( * ) appears
beside the address.
g. Press Start.
The printer displays
2. Press Stop to turn off the alarm.
3. CAUTION:
Make sure the machine is turned Off (O) before you
connect or disconnect the power cord or other cables.
If the machine has cables other than the power cord,
you must connect them before you plug the power cord
into an outlet. You must first unplug the power cord
from the outlet when you remove the other cables.
Before you connect the cable to the V-connector, slip a cable
shield over the end of the cable. (If you are connecting two
cables, slip a cable shield over the end of both cables.)
15 COMMUNICATIONS CHECK
CHECK CABLE
2-4 User’s Guide