Lexmark 4I3 User Manual
Page 277
Problem: Ribbon not moving
1: The ribbon cartridge is not properly installed.
Solution: Remove and then reinstall the same ribbon. See
Chapter 4, “Replacing Your Ribbon.” If the ribbon still does not
move, replace the ribbon.
Problem: Ribbon moves continuously
1: The ribbon drive circuit is failing.
Solution: Call for service.
Miscellaneous Problems
Problem: Wrong language set
1: Wrong language set selected.
Solution: See “Using Printer Setup Parameters” in IBM 4230
Printer Models 102, 1I1, 202, 2I1, 4I3, and 5I3 Operator Panel
Instructions for information on selecting language sets.
Problem: First print character in wrong place
1: Left margin or top of form is not properly aligned.
Solution: Check the left margin and top of form position
adjustments. See the appropriate forms device in Chapter 1,
“Setting Up the 4230 Printer.”
Appendix B. Problems
B-47