Lexmark 4I3 - Manual (Page 228)

9. Show the operator how to adjust the forms thickness setting to
adjust print quality. Emphasize obtaining a smudge-free top
copy and legibility on back copies for multiple-part forms and
smudge-free legibility single-part forms.
10. Show the operator how to run Operator Print Tests, and describe
when and how to use them. See Chapter 5, “Using the
Operator Print Tests” for more information.
11. Show the operator how to use the problem-solving information in
“Using the Status Code and Problem Listings” on page B-2.
Give examples of status code displays, such as
Describe how to call for service if you cannot solve the problem
using the procedures.
12. Show the operator how to do the forms device inspection
procedure. See “Forms Device Inspection” on page B-35 for
more information.
13. Show the operator “Checking and Changing Configuration
Parameter Values” in IBM 4230 Printer Models 102, 1I1, 202,
2I1, 4I3, and 5I3 Operator Panel Instructions on parameter
values. Show how to check and change parameter values.
1 END OF FORMS
LOAD FORMS
A-6 User’s Guide