Lexmark 4I3 User Manual
Page 233
Status Codes
Continuous Forms Device (F1) and Dual Purpose Forms Device
(F2):
1. Press Stop.
2. Load forms.
3. Be sure that the forms are loaded correctly and that they are
under the blue forms guide/forms sensor.
4. Be sure that nothing blocks the blue forms guide/forms
sensor.
5. Reset the top of form position.
6. Press Start.
Document Insertion Device (F3) and Auto Sheet Feeder Device
(F4):
1. Press Stop.
2. Press Load/Eject.
3. Load the correct form size, or
4. Check the maximum page length setting and correct it; then
reload the form and restart the print job (see “Introducing the
4230 Printer” in IBM 4230 Printer Models 102, 1I1, 202, 2I1, 4I3,
and 5I3 Product and Programming Description for more
information on the maximum page length setting).
1 END OF FORMS
LOAD FORMS
Appendix B. Problems
B-3