Lexmark 4I3 - Manual (Page 313)

print job
canceling 3-26
starting 3-25
stopping 3-25
print language 3-16
print mode 3-16
print quality adjustments
F1 (Continuous Forms
Device) 1-38
F2 (Dual Purpose Forms
Device) 1-70
F3 (Document Insertion
Device) 1-101
print tests
bidirectional adjustment 5-19
left margin alignment 5-6
print verification 5-16
printer configuration 5-9
printer demonstration 5-3
print verification test 5-16
printer
attaching to a computer
coaxial 2-18
twinaxial 2-2
configuration (print test) 5-9
connecting to an
IBM AS/400 2-12
IBM System/36 2-15
demonstration (print test) 5-3
left margin (print test) 5-6
problems 1-15
verification (print test)
5-16
printer settings 3-16
printer setup
check out ribbon cartridge
installation 1-9
F1 (Continuous Forms Device)
check out F1 forms device
installation 1-23
install the 1-21
load forms in the F1 forms
device 1-26
printer setup (continued)
F1 (Continuous Forms Device)
(continued)
prepare to load F1
forms 1-24
print verification test for the F1
forms device 1-33
F2 (Dual Purpose Forms Device)
check out F2 forms device
installation 1-58
install the 1-55
load forms in the F2 forms
device 1-60
prepare to load F2
forms 1-59
print verification test for the F2
forms device 1-66
F3 (Document Insertion Device)
check out F3 forms device
installation 1-90
install the 1-88
load forms in the F3 forms
device 1-94
prepare to load F3
forms 1-93
print verification test for the F3
forms device 1-98
install the ribbon cartridge 1-6
introduction 1-1
parts checklist
1-2
prepare for installation
forms device 1-14
ribbon cartridge 1-6
printer problems 1-15
ribbon guide installation 1-8
problem determination 3-23, A-7
problem list (no status code
displayed)
forms problems
do not advance or overprint
occurs B-38, B-40
Index X-13