LevelOne GSW-2600TXM - Manual (Page 101)

101
OSPF Neighbor Table
===================
IP Address ID Router ID Option Priority State
Events
Page 1 <Apply> Total 0 Pages
<OK> <Prev Page> <Next Page>
The page number.
| READ/WRITE
Use <TAB> or arrow keys to move, other keys to make changes.
Parameter Description
IP Address IP address of the neighboring router.
ID
The index number of the router interface to which this neighbor is
attached. For IP protocol, this value will always be zero.
Router ID The OSPS identifier for the neighboring router.
Option The optional OSPF capabilities supported by the neighbor. The neighbor's
optional OSPF capabilities are also listed in its Hello packets. This
enables received Hellos to be rejected (i.e., neighbor relationships will not
even start to form) if there is a mismatch in certain crucial OSPF
capabilities. The OSPF optional capabilities currently accepted include
external routing capability and TOS capability.
You need to map the binary bits to the supported options. For example,
“3” indicates both routing capability and TOS capability.
Priority The neighbor’s router priority. This priority is used in electing the
designated router for the area in which it exists. This value will be set to
zero if this router cannot be elected.