LevelOne GSW-2600TXM - Manual (Page 113)

113
System Restart Menu
Restart Option
Restarts the system with options to restore factory defaults.
1. Only displays if the intelligent switch is set to Layer 2 mode or the switch is
management
model.
2. Only displays when intelligent switch is set to multilayer mode. (Note that this menu
includes IGMP Snooping Configuration.)
3. Only displayed in intelligent switch.
3.4.System Information Menu
Use the System Information Menu to display a basic description of the switch, including
contact information, and hardware / firmware versions.
Menu Description
System Information Provides basic system description, including contact information.
Switch Information
Shows hardware / firmware version numbers, power status, and
expansion modules used in the switch.
3.4.1.Displaying System Information
Use the System Information screen to display descriptive information about the switch,
or for quick system identification as shown in the following figure and table.
Parameter Description
System Description System hardware description.
Object ID
MIB II object identifier for switch’s network management
subsystem.
System Up Time Length of time the current management agent has been running.
System Name* Name assigned to the switch system.
System Contact* Contact person for the system.
System Location* Specifies the area or location where the system resides.
* Maximum string length is 99, but the screen only displays 45 characters. You can use
the arrow keys to browse the whole string.